Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

Client utility and driver release 2.40 supports the recently released Windows CE .NET 4.2 (with an X86 
or StrongARM processor) and PPC 2003 devices.

This release should operate with Windows CE .NET 4.2 devices with an XSCALE processor; however, 
official testing was not conducted with these devices.

This section describes how to install or upgrade to client utility and driver release 2.40 for
Windows CE.

Cisco recommends that you uninstall the existing driver and client utilities for your client adapter before 
upgrading to more recent releases. Follow these steps to uninstall your client adapter’s current driver and 
client utilities.

Eject the client adapter and remove it from the Windows CE device.

Tap Start > Settings > System tab > Remove Programs (on PPC devices) or Start > Settings > Control 
Panel > Remove Programs (on HPC and Windows CE .NET devices).

Tap Cisco Wireless LAN Adapter.

Tap the Remove button.

When asked to verify your decision to remove the adapter, tap Yes.

Tap OK. The driver, client utilities, registry entries, and Cisco directory are removed.

Go to the 

 section below for instructions on loading the new 

driver and client utilities.

Follow these steps to install client utility and driver release 2.40 for your client adapter.

Connect your Windows CE device to a laptop or PC running Microsoft ActiveSync. This is typically 
done using a serial or USB cable.

A message appears on the Windows CE device indicating that it is connecting to the host. After the 
Windows CE device is connected, the New Partnership window appears on the laptop or PC. This 
window asks if you want to set up a partnership.