Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
5
Release Notes for Cisco Aironet Client Utilities 2.50 and Driver 2.50 for Windows CE
OL-5517-01
Installing or Upgrading to a New Client Utility and Driver Release
LDAP user databases (such as NDS) support only manual PAC provisioning while the other three user
databases support both automatic and manual PAC provisioning.
databases support both automatic and manual PAC provisioning.
Note
Refer to
Chapter 5
of the Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and
Configuration Guide for Windows CE (part number OL-1375-04) for instructions on enabling
EAP-FAST authentication for your client adapter.
EAP-FAST authentication for your client adapter.
Installing or Upgrading to a New Client Utility and Driver
Release
Release
This section describes how to install or upgrade to client utility and driver release 2.50 for
Windows CE.
Windows CE.
Uninstalling the Current Driver and Client Utilities
Cisco recommends that you uninstall the existing driver and client utilities for your client adapter before
upgrading to more recent releases. Follow these steps to uninstall your client adapter’s current driver and
client utilities.
upgrading to more recent releases. Follow these steps to uninstall your client adapter’s current driver and
client utilities.
Step 1
Eject the client adapter and remove it from the Windows CE device.
Step 2
Tap Start > Settings > System tab > Remove Programs (on PPC devices) or Start > Settings > Control
Panel > Remove Programs (on HPC and Windows CE .NET devices).
Panel > Remove Programs (on HPC and Windows CE .NET devices).
Step 3
Tap Cisco Wireless LAN Adapter.
Step 4
Tap the Remove button.
Step 5
When asked to verify your decision to remove the adapter, tap Yes.
Step 6
Tap OK. The driver, client utilities, registry entries, and Cisco directory are removed.
Step 7
Go to the
section below for instructions on loading the new
driver and client utilities.
Loading a New Driver and Client Utilities
Follow these steps to install client utility and driver release 2.50 for your client adapter.
Step 1
Connect your Windows CE device to a laptop or PC running Microsoft ActiveSync. This is typically
done using a serial or USB cable.
done using a serial or USB cable.
A message appears on the Windows CE device indicating that it is connecting to the host. After the
Windows CE device is connected, the New Partnership window appears on the laptop or PC. This
window asks if you want to set up a partnership.
Windows CE device is connected, the New Partnership window appears on the laptop or PC. This
window asks if you want to set up a partnership.
Note
Cisco recommends that you install the latest release of ActiveSync.