Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

Access points must use Cisco IOS Release 12.2(13)JA or later to enable RM. Refer to the documentation 
for your access point for instructions on enabling this feature.

Refer to this URL for additional information on SWAN:

To minimize the risk of a power failure during the firmware flashing process, which could render your 
client adapter inoperable, Cisco recommends that your computer be plugged into AC power or have a 
fully charged battery at the start of flashing. If a power failure does occur, follow the instructions in the 

 section to contact TAC for assistance.

This section describes how to upgrade to client adapter firmware version 5.40.10 on a computer running 
the Windows 2000 or XP operating system.

Refer to the Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration 
Guide for Windows CE (part number OL-1375-04) for instructions on upgrading the firmware on a 
Windows CE device. This document is at the following URL:

To find the firmware version that your client adapter is currently using, open ACU and click the Status 
icon. The Firmware Version field on the Status screen shows the firmware version.