Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
5
Release Notes for Cisco Aironet 350 and CB20A Client Adapter Firmware 5.40.10
OL-5516-01
Upgrading to a New Firmware Version
Upgrading the Firmware
Follow these steps to upgrade your client adapter’s firmware to version 5.40.10.
Note
When you upgrade your client adapter’s firmware using ACU, the Automatically Load New Firmware
When NDIS Driver Is Updated parameter on the Aironet Client Utility Preferences screen becomes
disabled (or unchecked) automatically to prevent the newly loaded firmware from being overwritten by
the driver. If you ever want to enable this parameter, you must recheck the check box.
When NDIS Driver Is Updated parameter on the Aironet Client Utility Preferences screen becomes
disabled (or unchecked) automatically to prevent the newly loaded firmware from being overwritten by
the driver. If you ever want to enable this parameter, you must recheck the check box.
Step 1
Use the computer’s web browser to access the following URL:
Step 2
Choose Option #2: Aironet Wireless Software Display Tables.
Note
You can download software from the Software Selector tool instead of the display tables. To do
so, choose Option #1: Aironet Wireless Software Selector, follow the instructions on the
screen, and go to
so, choose Option #1: Aironet Wireless Software Selector, follow the instructions on the
screen, and go to
.
Step 3
Click Cisco Aironet Wireless LAN Client Adapters.
Step 4
Under Individual Files, find the client adapter firmware.
Step 5
Click the link that corresponds to your client adapter’s model number (such as 350 series).
Step 6
Click the latest firmware file for your specific client adapter type (such as CB or MPI).
Note
The firmware for PC, LM, and PCI cards is labeled PCMCIA-LMC-PCI, the firmware for mini
PCI cards is labeled mini PCI or MPI, and the firmware for PC-Cardbus cards is labeled CB.
PCI cards is labeled mini PCI or MPI, and the firmware for PC-Cardbus cards is labeled CB.
Step 7
Complete the encryption authorization form; then read and accept the terms and conditions of the
Software License Agreement.
Software License Agreement.
Step 8
Click the firmware file again to download it.
Step 9
Save the file to a floppy disk or to your computer’s hard drive.
Step 10
Find the file using Windows Explorer, double-click it, and extract the image file to a folder.
Note
To extract the file, click Browse on the WinZip Self-Extractor screen, select the folder in which
you want the file to be placed, and click OK and Unzip. After the file is extracted, click OK to
close the screen.
you want the file to be placed, and click OK and Unzip. After the file is extracted, click OK to
close the screen.
Step 11
Make sure the client adapter is installed in your computer and is operational.
Step 12
Open ACU and click the Load Firmware icon. The Load New Firmware screen appears (see