Руководство По Установке для Cisco Cisco ONS 15216 (EDFA3) Metropolitan Regional DWDM System
Ground lug
2
Ground point
1
Pan head screw
4
Lock washer
3
c) Tighten the lug using the screws.
d) Terminate the other end of the ground cable either at the office ground point or the rack ground point.
d) Terminate the other end of the ground cable either at the office ground point or the rack ground point.
For installing and routing fiber-optic and USB cables, see "
12
". For cleaning the fiber-optic connectors, see "
".
Installing and Routing Fiber-Optic and USB Cables
The patch panel is passive and requires no power cabling or connections. All connectors are on the front panel and are equipped with
LC/UPC bulkhead adapters and with a USB Type A receptacle connector for inventory purpose. For port label description, see "
LC/UPC bulkhead adapters and with a USB Type A receptacle connector for inventory purpose. For port label description, see "
2: Port Label Descriptions, on page 6
".
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams
or view directly with optical instruments. Statement 1051
or view directly with optical instruments. Statement 1051
Warning
When connecting an optical fiber patch cord between the patch panel and the optical card ports in a Cisco
ONS 15454, use the electrostatic discharge wristband supplied with the ONS 15454. Plug the wristband
into the ESD jack on the lower right front side of the ONS 15454.
ONS 15454, use the electrostatic discharge wristband supplied with the ONS 15454. Plug the wristband
into the ESD jack on the lower right front side of the ONS 15454.
Caution
12