Руководство По Устранению Ошибки для Cisco Cisco Prime Network Registrar Jumpstart 8.0
2
Cisco Prime Network Registrar Jumpstart 8.0 Recovery Guide
OL-26419-01
Recovery Procedures
Recovery Procedures
This section explains the following recovery procedures:
•
•
Recovering Cisco Prime Network Registrar Jumpstart
To recover Cisco Prime Network Registrar Jumpstart:
Step 1
Place your Recovery DVD 1 of 2 in your DVD-ROM drive on the UCS appliance and press the Reset
button.
button.
Step 2
When the Cisco logo appears, press F6 to enter the boot menu and choose the device, that is, the physical
DVD drive (SATA5:HL-DT-STDVDRAM GT40N).
DVD drive (SATA5:HL-DT-STDVDRAM GT40N).
Step 3
Follow the on-screen instructions to install ESXi 4.1.
Step 4
After Cisco Prime Network Registrar Jumpstart shuts down, remove the DVD from the drive.
Step 5
Start Cisco Prime Network Registrar Jumpstart and configure ESXi 4.1. See the "Configuring Network
Information for ESXi" procedure in the Cisco Prime Network Registrar Jumpstart 8.0 Getting Started
Guide for more information.
Information for ESXi" procedure in the Cisco Prime Network Registrar Jumpstart 8.0 Getting Started
Guide for more information.
Step 6
Using VMware vSphere, connect to the IP address or hostname of the UCS (ESXi) from
.
Step 7
Insert DVD 2 into a drive that you have access from vSphere client.
Step 8
From the vSphere menu, choose File > Deploy OVF Template.
The Deploy OVF Template Source window appears.
Step 9
To deploy the OVF file, click Browse and choose the OVF file (.ovf) available in the drive. Choose the
appropriate Local or Regional OVF in the corresponding subdirectory.
appropriate Local or Regional OVF in the corresponding subdirectory.
Complete the deployment following the on-screen instructions. See the "Deploying Cisco Prime
Network Registrar Virtual Appliance" procedure in the Installation Guide for Cisco Prime Network
Registrar 8.0 for details.
Network Registrar Virtual Appliance" procedure in the Installation Guide for Cisco Prime Network
Registrar 8.0 for details.
Note
You might want to resize the data disk before starting the virtual machine since the Recovery DVD has
the standard OVFs. For details regarding increasing the disk size, see the “Increasing the Size of Disk”
procedure in the “Introduction to Cisco Prime Network Registrar Virtual Appliance” chapter of the User
Guide for Cisco Prime Network Registrar 8.0.
the standard OVFs. For details regarding increasing the disk size, see the “Increasing the Size of Disk”
procedure in the “Introduction to Cisco Prime Network Registrar Virtual Appliance” chapter of the User
Guide for Cisco Prime Network Registrar 8.0.
Step 10
Open console for 'NR-local-ucs' virtual machine and click the Power on button to power up the virtual
machine. See the "Configuring Cisco Prime Network Registrar Virtual Appliance" procedure in the
Cisco Prime Network Registrar Jumpstart 8.0 Getting Started Guide.
machine. See the "Configuring Cisco Prime Network Registrar Virtual Appliance" procedure in the
Cisco Prime Network Registrar Jumpstart 8.0 Getting Started Guide.
Step 11
Connect to Cisco Prime Network Registrar using http://. It prompts you to create an admin user and
password for Cisco Prime Network Registrar.
password for Cisco Prime Network Registrar.