Руководство По Установке для Cisco Cisco Prime Network Registrar Jumpstart 8.2
5
Cisco Prime Network Registrar Jumpstart 8.2.0.2 Quick Start Guide
OL-31953-01
Configuring the Cisco Prime Network Registrar Jumpstart
Step 3
On the Server Summary page, in the Actions pane, click Launch KVM Console. You will be asked to
approve the running of the application, as this operation downloads code to run on your system. After
some delay, the KVM Console window is displayed.
approve the running of the application, as this operation downloads code to run on your system. After
some delay, the KVM Console window is displayed.
Note
If login fails, it may be either that someone else already has a virtual KVM console already active for
this UCS C220 server or that your browser is not configured to run Java Web Start.
this UCS C220 server or that your browser is not configured to run Java Web Start.
The initial screen on the KVM console displays VMware ESXi 5.1.0.
Step 4
Press F2 to customize the system.
Note
The virtual KVM console needs to capture the mouse to accept input. It may be necessary on some
systems to use the mouse to select the Single Cursor option from the Tools menu of the KVM Console
window. If nothing happens when you press F2, select the Session Options from the Tools menu and
click OK. Usually this causes the mouse to be captured, and then the functions keys will make it through
to the console. If you want the mouse back, you can press F12.
systems to use the mouse to select the Single Cursor option from the Tools menu of the KVM Console
window. If nothing happens when you press F2, select the Session Options from the Tools menu and
click OK. Usually this causes the mouse to be captured, and then the functions keys will make it through
to the console. If you want the mouse back, you can press F12.
Step 5
Press F2 again to view the login window.
Step 6
Log into the host. The default username is root and the password is password.
Select the Configure Password option and reconfigure the root password after you log in.
Step 7
Using the arrow keys, select the Configure Management Network option and press Enter.
Configuring IP
Step 8
For IP configuration:
a.
Use the arrow keys to select IP Configuration and press Enter.
b.
Use the arrow keys to select Set Static IP address and Network Configuration.
c.
Use the space bar to enable this selection.
d.
Use the arrow keys to select IP Address and enter the IP address.
e.
Use the arrow keys to select Subnet Mask and enter the subnet mask.
f.
Use the arrow keys to select Default Gateway and enter the gateway address.
g.
Press Enter to accept the IP Configuration updates.
Note
If you want to use IPv6 with Cisco Prime Network Registrar, use the arrow keys to select IPv6
Configuration and enter the information requested on that screen.
Configuration and enter the information requested on that screen.
Configuring DNS Servers
Step 9
To configure the DNS Servers:
a.
Use the arrow keys to select DNS Configuration and press Enter.
b.
Use the arrow keys to select Primary DNS Server and enter the IP address of the primary DNS
server.
server.
c.
Use the arrow keys to select Alternate DNS Server and enter the IP address of the alternate DNS
server.
server.