Примечания к выпуску для Cisco Cisco Prime Performance Manager 1.5
7
Cisco Prime Performance Manager 1.5 and 1.5.1 Release Notes
OL-30432-01
Release 1.5.1 New Features and Enhancements
Note
You can also verify your group by looking at the group xml file in etc/groups/user/. The usage
section should have all AP IDs from the AP group file you added to the apDrop directory.
section should have all AP IDs from the AP group file you added to the apDrop directory.
RMS AP Single DB Table Report
The AP Single DB Table Report examines specific counters gathered by Prime Performance Manager
for the Cisco Small Cell Solution. You should only enable this report when Prime Performance Manager
is monitoring a small number of APs. Performance degradation can occur if it is used for a large number
of APs. For best performance, enable the following RMS AP reports:
for the Cisco Small Cell Solution. You should only enable this report when Prime Performance Manager
is monitoring a small number of APs. Performance degradation can occur if it is used for a large number
of APs. For best performance, enable the following RMS AP reports:
•
AP INTER LUS
•
AP INTRA LUS
•
AP KPI
•
AP Multi DB Table
Release 1.5.1 New Features and Enhancements
Prime Performance Manager 1.5.1 new features and enhancements are provided in the following
sections. You can view a detailed list of changes in Release 1.5.1 after installation by choosing Help >
READMEs and CLI Commands > CHANGES.
sections. You can view a detailed list of changes in Release 1.5.1 after installation by choosing Help >
READMEs and CLI Commands > CHANGES.
•
•
•
•
•
•
•
•
•
•
Primary Features and Enhancements
•
StarOS 16.0 including new counters introduced in StarOS 16.0
•
StarOS 16.0 MR1 including compatibility with counters up through StarOS 16.0
•
Quantum Virtual Packet Core Single Instance (QvPC SI) / Virtual Evolved Packet Core (vEPC) SSI
•
Cisco ME 1200 reports
•
Cisco CPT:
–
SNMP v3
–
SSH