Руководство Разработчика для Cisco Cisco Prime Optical 10.6
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
36
2.1.8 ONS 15454 SONET
See the
Prime Optical 10.6 supports.
2.1.8.1
Shelves
All supported ONS 15454 SONET NEs have exactly one shelf each, with the exception of the ONS
15454 SONET MSTP R7.0, which can have up to eight shelves per NE.
15454 SONET MSTP R7.0, which can have up to eight shelves per NE.
2.1.8.2
Slots
Each ONS 15454 SONET shelf has 17 slots. The Timing Communications and Control Plus (TCC+) card
must occupy slot 7 or slot 11. For more information, refer to the Cisco ONS 15454 SONET user
documentation.
must occupy slot 7 or slot 11. For more information, refer to the Cisco ONS 15454 SONET user
documentation.
2.1.8.3
Equipment
All the cards in the ONS 15454 SONET R5.0 and later display administration and service states. For
earlier software releases, these states are not applicable and Prime Optical displays them as N/A. The
following tables show the attribute values for these two states.
earlier software releases, these states are not applicable and Prime Optical displays them as N/A. The
following tables show the attribute values for these two states.
2.1.8.3.1
Equipment Administration State
The attribute name is ACTUAL_EQUIPMENT_SERVICE_STATE and is displayed in getAdditionalInfo
for the equipment.
for the equipment.
lists the attribute values for the administration state.
Table 2-10: Equipment Administration State (ONS 15454 SONET)
Attribute Value
Meaning
In Service
Places the entity In Service.
Auto in Service
Places the entity in Auto in Service. The circuit is out of service until it
receives a valid signal for the duration of the soak period, at which time the
circuit state changes to In Service. During the soak period, alarms and
loopbacks are suppressed but traffic is carried.
receives a valid signal for the duration of the soak period, at which time the
circuit state changes to In Service. During the soak period, alarms and
loopbacks are suppressed but traffic is carried.
Out of Service–
Maintenance
Maintenance
Removes the entity from service for maintenance. Alarms are no longer
generated.
generated.
Out of Service
Removes the entity from service and disables it. Alarms are no longer
generated and traffic is not carried.
generated and traffic is not carried.
2.1.8.3.2
Equipment Service State
The attribute name is ACTUAL_EQUIPMENT_SERVICE_STATE and is displayed in getAdditionalInfo
for the equipment. The attribute value for the service state is the same as that shown in Prime Optical.
for the equipment. The attribute value for the service state is the same as that shown in Prime Optical.
Table 2-11: Equipment Service State–Primary (ONS 15454 SONET)
Primary States (PST-PSTQ)
Attribute Value
Attribute Value
Meaning
In Service–Normal (IS_NR)
The entity is fully operational and performs as provisioned.
Out of Service–Management
(OOS_MA)
(OOS_MA)
The entity has been administratively removed from service.
Out of Service–Autonomous
(OOS_AU)
(OOS_AU)
The entity is not operational due to an autonomous event.
Out of Service–Autonomous and
Management (OOS_AUMA)
Management (OOS_AUMA)
The entity is not operational due to an autonomous event and has
been administratively removed from service.
been administratively removed from service.