Руководство По Установке для Cisco Cisco Content Delivery Engine 400
MegaRAID SAS Controller BBU Replacement Procedure
EDCS-1458166
All contents are Copyright © 2012 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
13
Figure 17: MegaRAID 9261-8i and BBU
c. Re-install the BBU by connecting the BBU to the controller connector and re-
attaching the 3 screws to the rear of the card which were removed in step a
above
above
10. Before re-installing the new MegaRAID controller, make sure that the BBU is installed
onto the card properly as shown in Figure 15.
11. Reinstall the 9261-8i MegaRAID controller into slot 3 for CDE220/420 and slot1 for the
CDE250/460/470 – ensuring it is fully seated into the PCIe slot.
12. Re-attach slot screw to firmly attach 9261-8i MegaRAID controller and check that all slots
screws are tightened.
13. Reattached the mini SAS cable to the 9261-8i MegaRAID controller.
14. Replace the top cover and rack the chassis.
15. Replace the power supplies and reconnect all cables, make sure you verify labels after all
cables and fiber/copper are connected to interfaces.
16. Boot the server.