Руководство По Установке для Cisco Headend System Release 2.7
Add a Program MQAM Modulator
4017650 Rev C
45
Important: The system inserts the Configuration File Name automatically. Do
not change this field without first consulting our technical support. Refer to
Customer Support (on page 190) for detailed information. The system
configuration file tells the MQAM modulator which version of software it should
be running.
not change this field without first consulting our technical support. Refer to
Customer Support (on page 190) for detailed information. The system
configuration file tells the MQAM modulator which version of software it should
be running.
2 Click Apply. The system saves this information into the DNCS database.
3 Your next step is to set up the connections between the program MQAM
3 Your next step is to set up the connections between the program MQAM
modulator and its associated MPEG source(s). Go to Setting Up Program MQAM
Modulator Connections (on page 45).
Modulator Connections (on page 45).
Setting Up Program MQAM Modulator Connections
After you set up the program MQAM modulator advanced parameters, complete
these steps to set up the connections between the modulator and its associated
MPEG source.
1 On the Set Up MQAM window, click the Connectivity tab. The Connectivity tab
these steps to set up the connections between the modulator and its associated
MPEG source.
1 On the Set Up MQAM window, click the Connectivity tab. The Connectivity tab
information moves to the forefront with an illustration of the devices already
connected to this MQAM modulator.
connected to this MQAM modulator.
2 If not already selected, click to select the Input 1 Port option.