Руководство По Установке для Cisco Headend System Release 2.7
Understand the Data in the Doctor Report Fields
4020695 Rev C
49
Ping All Active Elements
The data in the Ping All Active Elements field reports whether the communication
path between the DNCS and the following system devices is active:
path between the DNCS and the following system devices is active:
All active QAM-family modulators
All active QPSK modulators (Ethernet and RF)
The BIG
The TED
Important: If the Doctor Report reports an error, complete the following tasks to
troubleshoot the error:
troubleshoot the error:
Visually check that the device is powered on and that the cabling is secure.
Use a network analyzer to confirm that IP traffic is reaching the device.
Reboot the device.
DoctorRemote
The Doctor Report reports on the configuration of any remote site supported by the
system. The information collected from remote sites is similar to the information
collected from the DNCS. The following list contains the fields reported on for the
remote sites:
system. The information collected from remote sites is similar to the information
collected from the DNCS. The following list contains the fields reported on for the
remote sites:
System Name
All SAI Installed Package Information
LIONN Info
LIONN Disk Partition Utilization
LIONN Swap Space
LIONN Database Log Check
Note: This field appears only for remote sites. The LIONN Database Log Check
field reports on the size of the /dvs/lionndb/liondb.log and
/dvs/lionndb/lionnconnection.log files.
Note: This field appears only for remote sites. The LIONN Database Log Check
field reports on the size of the /dvs/lionndb/liondb.log and
/dvs/lionndb/lionnconnection.log files.
LIONN Database Process Check
Note: This field appears only for remote sites. The LIONN Database Process
Check field reports on whether the Informix daemon processes are running.
Note: This field appears only for remote sites. The LIONN Database Process
Check field reports on whether the Informix daemon processes are running.
LIONN Load Average
Current LIONN Debug Flags Set
LIONN Processes