Руководство По Установке для Cisco Headend System Release 2.5
Download Software to the MQAM Modulators
4023372 Rev B
25
Note: In the following QAM List window, MQAM1 would be reset once even
though it is listed four times.
4 Click File and select Reset. The Question window opens and asks you to confirm
the reset of the MQAM.
5 Click Yes. The QAM List window displays the following message:
The reset request has been received by QAM modulator <Name of MQAM>
Notes:
Notes:
The <Name of MQAM> represents the name of the modulator you just reset.
It may take up to 5 minutes for each modulator to reset.
6 Do you see the IP address for the MQAM you reset in the bootpd log file?
If yes, continue with this procedure.
If no, call Cisco Services.
Note: For details about IP addresses in the bootpd log file, go to
Preparing to
Monitor Remote MQAM Resets (on page 24).
7 Repeat steps 3 through 6 for up to three additional modulators and then go to
step 8.
Important: Never reset more than four modulators at once or you may cause
Important: Never reset more than four modulators at once or you may cause
MQAMs to have to retry downloads due to traffic congestion on the network.
8 Choose one of the following options and then come back to step 9 of this
procedure.
For MQAM modulators that carry broadcast sessions, go to Verifying the
Functionality of MQAM Modulators That Carry Broadcast Sessions
(on page 29).
For MQAM modulators that carry xOD or VOD sessions, go to Verifying the
Functionality of MQAM Modulators That Carry xOD or VOD Sessions
(on page 30).