Руководство Пользователя для Cisco Headend Digital Broadband Delivery System
4002178 Rev C
Parental Control Options
10-27
Specify the Length of Time That a Channel is Locked Out
When a Subscriber Enters an Incorrect Blocking PIN,
Continued
Lockout Parameters
The Blocking PIN Lockout Time option works in conjunction with the Invalid Tries,
Trial Timer, and Enable Blocking PIN Lockout options to determine whether a
channel is locked out.
Example: Assume the options are set as follows:
•
Example: Assume the options are set as follows:
•
Invalid Tries – 3
•
Trial Timer – 1 minute
•
Lockout Time – 30 minutes
•
Enable Blocking PIN Lockout – Enabled
In this case, if a subscriber enters three incorrect PINs within 1 minute, the set-top
will lock out the ability to unlock the channel for 30 minutes.
Important: Be sure to enter the same values for both the Blocking PIN Lockout and
Important: Be sure to enter the same values for both the Blocking PIN Lockout and
Purchase PIN Lockout options.
Recommended Setting
Set the lockout time to 10 minutes.
Specifying the Length of Time to Lock Out a Channel After a Subscriber Enters an Incorrect
Blocking PIN
To specify the length of time to lock out a channel after a subscriber enters an
incorrect blocking PIN too many times in a specified time frame, complete the
following steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the PIN Entry tab.
Result: The PIN Entry tab appears in the forefront.
Result: The PIN Entry tab appears in the forefront.
5.
Make sure the Enable Blocking PIN Lockout field under Blocking PIN is
selected.