Руководство По Установке для Cisco Cisco StadiumVision Mobile
© 2011 Cisco Systems, Inc. All rights reserved
Page 30 of 71
4. Slide the chassis until the release spring clicks into place, then push the
chassis until the rack-mounting ear meets the front rack posts. See location 1
in Figure 30.
in Figure 30.
Figure 30. Sliding the Chassis Into the Rack
5. (Optional) For extra security, you can attach a third 10-32 x 1/2-inch rack
screw from the center of the rack-mounting ear into the front rack post. See
location 1 in Figure 31.
location 1 in Figure 31.
Figure 31. Securing the Appliance to the front rack posts
Connecting the AC Power Supplies to Power
Warning! This equipment must be grounded. Never defeat the ground conductor
or operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you are
uncertain that suitable grounding is available. Statement 1024
or operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you are
uncertain that suitable grounding is available. Statement 1024
Warning!
This product relies on the building’s installation for short-circuit
(overcurrent) protection. Ensure that the protective device is rated not greater
than: 10 Amps Statement 1005
than: 10 Amps Statement 1005
Warning! Before working on a system that has an on/off switch, turn Off the
power and unplug the power cord. Statement 1
power and unplug the power cord. Statement 1
Warning! Do not touch the power supply when the power cord is connected. For
systems with a power switch, line voltages are present within the power supply
even when the power switch is off and the power cord is connected. For systems
systems with a power switch, line voltages are present within the power supply
even when the power switch is off and the power cord is connected. For systems