Руководство По Обслуживанию для Cisco Cisco StadiumVision Director
© 2011 Cisco Systems, Inc. All rights reserved.
Page 34 of 40
Automatically Executing the Provision DMP Command
The Provision DMP operation is automatically initiated if the Enable Auto
Provisioning and Enable Auto Registration keys are set to true in the Dashboard. The
Provision DMP will be skipped if the DMP is in
Provisioning and Enable Auto Registration keys are set to true in the Dashboard. The
Provision DMP will be skipped if the DMP is in
the “Ready” or “In Production” state.
Whenever a registration message is received from the DMP, a new instance of this
workflow command is created or a previously running instance is advanced. The DMP
sends a registration request to the SV Director every time it is rebooted, assuming
that DHCP is enabled and the DHCP Server is appropriately configured. Several of
the commands in the Provision DMP workflow require the DMP to be rebooted. Such
commands will automatically reboot the DMP as needed.
workflow command is created or a previously running instance is advanced. The DMP
sends a registration request to the SV Director every time it is rebooted, assuming
that DHCP is enabled and the DHCP Server is appropriately configured. Several of
the commands in the Provision DMP workflow require the DMP to be rebooted. Such
commands will automatically reboot the DMP as needed.
Preparing SV Director and the DHCP Server for auto registration and provisioning is
described in the StadiumVision Video Endpoints Design and Implementation Guide.
described in the StadiumVision Video Endpoints Design and Implementation Guide.
Auto Registering and Auto Provisioning Multiple DMPs
StadiumVision Director can auto register approximately 200 DMPs at the same time.
As registrations come in, up to 50 auto-registered DMPs can be provisioned in
parallel. The remaining DMPs are queued for provisioning and as DMPs complete the
provisioning process, new DMPs are provisioned.
As registrations come in, up to 50 auto-registered DMPs can be provisioned in
parallel. The remaining DMPs are queued for provisioning and as DMPs complete the
provisioning process, new DMPs are provisioned.
Manually Executing the Provision DMP Command
As an alternative to using auto provisioning, you can manually execute the Provision
DMP operation to provision one or more DMPs. This operation is executed from the
Dashboard just like any of the other Dashboard commands.
DMP operation to provision one or more DMPs. This operation is executed from the
Dashboard just like any of the other Dashboard commands.
Figure 23 illustrates the Provision DMP in the Dashboard Device Configuration
drawer.
drawer.
Figure 23.
Manually Executing the Provision DMP Command