для Cisco Cisco ACNS Software Version 5.5
3
Configuring Cisco Access Routers and the NME-WAE Network Module for ACNS Deployments
OL-13140-02
Cisco WAE Network Module Hardware Description
•
All WAE appliances and network modules that are in your network must be running the same version
of the ACNS software.
of the ACNS software.
•
Network module software configurations can only be performed by using a console that connects to
a single serial-port console port on the host router.
a single serial-port console port on the host router.
Because the network module does not have an external console port, you must configure the network
module by initiating a Telnet session or by initiating a configuration session from the router CLI.
module by initiating a Telnet session or by initiating a configuration session from the router CLI.
•
After initial setup, which requires using router configuration commands, you can configure the
NME-WAE in the same manner as other ACNS devices, with the following exceptions:
NME-WAE in the same manner as other ACNS devices, with the following exceptions:
–
The NME-WAE cannot serve as a Content Distribution Manager for other ACNS devices.
–
The NME-WAE does not support device mode configuration. The device mode configuration
prompt has been removed from the NME-WAE startup script.
prompt has been removed from the NME-WAE startup script.
–
Websense URL-filtering is not supported on the NME-WAE.
•
ACNS software does not support the following hardware-related features on the network module:
–
USB port
–
Compact Flash utilization LED
–
Software reset button
Cisco WAE Network Module Hardware Description
This section includes the following topics describing the WAE network module hardware:
•
•
•
Hard Disk and Memory Specifications
The NME-WAE ships from the factory with the hardware listed in
preinstalled.
Faceplate and LEDs
shows the NME-WAE faceplate and LEDs.
Table 1
Network Module Hardware
Model
Hard Disk
Memory
NME-WAE-502-K9
120 GB
1 GB
NME-WAE-522-K9
160 GB
2 GB