для Cisco Cisco Prime Network Services Controller 3.0
© 2013, 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 134 of 169
Setting Log Policy Attributes
This section includes the following topics:
●
●
●
●
Setting the Backup Count
You can set the backup count in a log policy.
BEFORE YOU BEGIN
Services Controller CLI.
CLI
Policy Manager
SUMMARY STEPS
1. connect policy-mgr
2. scope org
3. scope policy
4. scope log <policy-name>
5. set backup-count {1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9}
6. commit-buffer
DETAILED STEPS
Command
Purpose
Step 1 connect policy-mgr
Example:
nsc# connect policy-mgr
Places you in the policy manager
CLI.
CLI.
Step 2 scope org
Example:
nsc(policy-mgr)# scope org
Places you in organization mode.
Step 3 scope policy
Example:
nsc(policy-mgr) /org # scope policy
Places you in policy mode.
Step 4 scope log
Example:
nsc(policy-mgr) /org/policy # scope log
EaLogPA11
Places you in log mode.