для Cisco Cisco Administrative Workstation
Chapter 2 ICM-to-ICM Gateway Configuration
Defining Client ICM Configuration Data
2-6
ICM-to-ICM Gateway User Guide for Cisco ICM Enterprise & Hosted Editions Release 7.0(0)
Step 4
Specify the following values on the Attributes tab:
•
Name. Enter a name for the ICM Gateway.
•
Type. Choose Remote ICM.
•
Preferred Side. Indicates the preferred side of the Gateway to use when both
are available. If only one side is available, ICM software uses that side
regardless of preference.
are available. If only one side is available, ICM software uses that side
regardless of preference.
•
Encryption. Indicates whether requests to the Application Gateway are
encrypted. Choose None.
encrypted. Choose None.
•
Fault Tolerance. If the Application Gateway is duplexed, specifies the
fault-tolerance strategy it uses. Choose None.
fault-tolerance strategy it uses. Choose None.
•
Connection. Choose whether the Gateway is Duplex (has both a Side and
Side B connection), Simplex A (only has a Side A), or Simplex B (only has a
Side B).
Side B connection), Simplex A (only has a Side A), or Simplex B (only has a
Side B).
•
Description. (Optional.) Additional information about the gateway.
Step 5
Click the Save button to create the gateway.
Note
Make a note of the Application Gateway ID value, as you will need it
when you run Setup to configure the INCRP NIC on the Server ICM.
when you run Setup to configure the INCRP NIC on the Server ICM.
Step 6
To set the connection information, click on the Connection Side A tab or the
Connection Side B tab.
Connection Side B tab.
Step 7
To specify an address, click on the Enter Address button. The Enter NAM
Addresses dialog box appears.
Addresses dialog box appears.