для Cisco Cisco Administrative Workstation
2-7
ICM-to-ICM Gateway User Guide for Cisco ICM Enterprise & Hosted Editions Release 7.0(0)
Chapter 2 ICM-to-ICM Gateway Configuration
Defining Client ICM Configuration Data
Step 8
Specify the following information:
•
NAM Mode. Select Single NAM.
•
IP Address/Name. Enter the high priority IP address of the Server ICM.
(Normally this is the public IP address, but if no public address is available,
use the high priority private IP address.) This address must be the same
address specified for the INCRP NIC on the targeted system. (You may use
the hostname in place of the address.)
(Normally this is the public IP address, but if no public address is available,
use the high priority private IP address.) This address must be the same
address specified for the INCRP NIC on the targeted system. (You may use
the hostname in place of the address.)
•
Instance Number. Enter the number of the customer ICM on the Server ICM
(0 through 24).
(0 through 24).
•
Side. Indicate which side of the Client ICM prefers this connection:
–
Side A. Client ICM Side A prefers to use this connection.
–
Side B. Client ICM Side B prefers to use this connection.
–
None. Neither side of the Client ICM prefers to use this connection.