Руководство По Установке для Cisco Cisco Prisma II EDR Receiver
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
78-748704-01 Rev C
Installation
2-7
Connect RF Cables to the Chassis,
Continued
3.
Attach the other 75-ohm RF cables to the Port B connector (RF output 1B),
Port C (RF output 2A), and Port D (RF output 2B) connectors of the
corresponding slot where the processor is to be installed
4.
Route the RF cables to the appropriate RF destinations.
5.
If F-connectors are installed, use a 7/16-in. open-end wrench to secure both
cables to the connectors at the chassis.
6.
Proceed to the next section, Install the Processor in the Chassis.