Руководство По Установке для Cisco Cisco TelePresence MX700

Configuration using the web 

interface

You have to use the touch controller or remote control for

the configurations until you know your system's iP address.

Finding the IP address

tap

on your touch controller;

or navigate to

if you

use the remote control and on-screen menu.

in both cases you can find the iPv4 Address and/or iPv6 Address

of the system in the

section.

Signing in to the web interface

1. open a web browser and enter the system’s iP address

in the address bar.

2. enter your user name and password and click

.

the default user name is

admin

with no password set.

if you are not able to connect to the system:

•  Make sure the system and computer are connected to the

same network.

•  Make sure the system is switched on.

if the system has just been switched on, wait a few minutes

to allow the system to start up.

The web interface

Back to task overview

Cisco telePresence Video Systems

d14639.08 Video Systems Getting Started Guide tC6.0, february 2013.

Copyright © 2010–2013 Cisco Systems, inc. All rights reserved.

23

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Configuration