Руководство По Установке для Cisco Cisco TelePresence MX700

Provisioning set-up

(when using a provisioning system)

if in doubt for any of the parameters below, contact your

provisioning system provider.

See the administrator guide for your product to find more

information about the provisioning settings.

Select provisioning infrastructure

1. Go to the

tab and click

.

2. open the

settings from the left column.

3. under

heading select a provisioning

infrastructure in the

drop down list:

•  tMS – Cisco telePresence Management System
•  VCS – Cisco Video Communication Server (only available

for eX Series and MX series)

•  Callway –Webex telepresence
•  CuCM – Cisco unified Communications Manager
•  Auto - the system starts provisioning by first trying VCS,

then tMS and finally CuCM.

if you select

, all configurations must be set manually on

the video system.

Set the required provisioning parameters

Which parameters to set depend on which infrastructure was selected.

TMS

1. it may be required to authenticate the video system with

Cisco tMS. if so, enter

and

in the

respective input fields.

2. enter the iP address or dNS name of the Cisco tMS server in

the

input field under the

heading.

1)

3. enter the

to the provisioning service in the corre-

sponding input field

.

VCS (for EX Series and MX Series only)

1. it may be required to authenticate the video system with

the Cisco VCS. if so, enter

and

in

the respective input fields.

2. enter the iP address or dNS name of the Cisco VCS in the

input field under the

heading.

3. enter the SiP

for the Cisco VCS in the correspond-

ing input field

.

Have a look at the

appendix for more information about VCS

provisioning.

Webex Telepresence (formerly Callway)

upon ordering the Cisco Webex telepresence service, you

have received a

and an

.

Please contact your company's Webex telepresence admin-

istrator if you do not have a video phone number and an

activation code.

1. enter the Video number in the

input field

.

2. enter the Activation code in the

input field

.

CUCM

1. enter the iP address or dNS name of the uCM provisioning

server in the

input field under the

heading.*

You can find more details about setting up Cisco uCM provi-

sioning in the Administering TC endpoints on CUCM guide.

* the dHCP server can be set up to provide the external Manager

address automatically (option 242 for tMS; option 150 for uCM).

Any input in the input field overrides the setting provided by dHCP.

Back to task overview

If you are changing a value setting,

 

you always have to click

to confirm the change.

Cisco telePresence Video Systems

d14639.08 Video Systems Getting Started Guide tC6.0, february 2013.

Copyright © 2010–2013 Cisco Systems, inc. All rights reserved.

24

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Configuration