Технические ссылки для Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch
3
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
173
Port Management
This chapter describes commands you use to configure switch ports and link
aggregation groups (LAGs). It contains the following sections:
aggregation groups (LAGs). It contains the following sections:
•
•
•
•
Switch Ports
You can use the commands described in this section to configure and view
information on switch port capabilities.
information on switch port capabilities.
auto-negotiate
Use this command to enable auto-negotiation on a port. Use the
no form of the
command to disable the auto-negotiation and put the port to fixed speed of
100 MB full-duplex.
100 MB full-duplex.
auto-negotiate
[
capability1
][
capability2…capability5
]
no auto-negotiate
Syntax Descriptions
Parameter
Description
capability
The capabilities to advertise. Possible values:
10h, 10f,
100h, 100f, and 1000f. If capabilities are unspecified, the
default to list of all capabilities of the port.
default to list of all capabilities of the port.