Руководство По Обслуживанию для Cisco Cisco TelePresence MX700
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Quick Reference Guide
D14996.09 Administering TC7.2 Endpoints on CUCM 10.5.1, NOVEMBER 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
44
Setting the system password
The system password will restrict access to the TelePresence
endpoint and is set from the web interface or the API. The
endpoint is delivered with a default user account (admin) with
full credentials and no password is set.
If the endpoint is set up with an encrypted security profile
NOTE:
If the TelePresence endpoint is set up with an
encrypted security profile the endpoint will read the admin
password from the CUCM; given that:
•
Endpoint:
A user with administrator rights must exist
on the endpoint and the user name must be admin.
The password will be provisioned by CUCM unless the
password was blank on CUCM.
•
CUCM:
The user name must be admin and the password
cannot be blank.
Access through HTTP and SSH
Be aware that HTTP (web interface) and SSH (used for
Be aware that HTTP (web interface) and SSH (used for
command line) may be disabled in the endpoint configuration
on CUCM. This will prevent access to the endpoint's web
interface and command line interface. See
on page 21 how to enable/disable
Web access and SSH access.
If used with Cisco TelePresence Manager
NOTE:
The system password set on the endpoint must
match the value set in the CUCM in order for the Cisco
TelePresence Manager (CTS-MAN) to discover the endpoint
and provide One Button to Push scheduling to it.
Using the web interface
Log in to the endpoint through the web interface with your
username and current password. If a password is currently
not set, use a blank password when logging in.
Set or change the system password
1. Click on the username in the upper right corner and
choose Change password in the drop down menu.
2. Enter the Current password, the New password, and
repeat the new password in the appropriate input fields.
The password format is a string with 0–64 characters.
The password format is a string with 0–64 characters.
3. Click Change password.
The new system password will apply when you log in through
the web interface or command line interface.
Using the command line interface
Open a command line interface (e.g. PuTTY) and log in to the
endpoint (codec) with your username and current password.
If a password is currently not set, use a blank password when
logging in.
Set or change the system password
xCommand SystemUnit AdminPassword Set
Password: ***********
The password format is a string with 0–64 characters.
The password format is a string with 0–64 characters.
The new system password will apply when you log in through
the command line interface. The endpoint (codec) must be
restarted to make the password apply to the web interface.
Contents
Introduction
CUCM configuration
Endpoint configuration
About passwords
Appendices
Endpoint configuration