Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

Finding the MAC address of the endpoint

The MAC (Media Access Control) address can be found:

• On the System Information page (using the web interface,

Touch controller or remote control).

• By running an API command using a command line

interface.

• On the rating label of the TelePresence endpoint.

Cisco TelePresence Endpoints and Cisco Unified Communications Manager

Quick Reference Guide

D14996.09 Administering TC7.2 Endpoints on CUCM 10.5.1, NOVEMBER 2014.

Finding the MAC address on the System

Information page

Using the web interface
To find the system’s MAC address, navigate to Home >

System Information and see the General section.

Using the Touch controller
To find the system’s MAC address tap the upper left corner of

the Touch panel, followed by Settings > System Information.

Then see the Hardware section.

Using the remote control
To find the system’s MAC address, navigate to Home >

Settings > System Information and see the Hardware section.

Finding the MAC address using a command line

interface

To find the system’s MAC address:

1. Open a command line interface (e.g. PuTTY) and log in to

the endpoint (codec)

2. Run the following API command:

xStatus Network 1 Ethernet MacAddress

Finding the MAC address on the rating label

The rating label is found on the physical unit.

If the product is already mounted (wall/rack) it will be more

convenient to use one of the other methods described on this

page to find the MAC address.

The rating label is underneath the codec:

•  Cisco TelePresence Quick Set C20
•  Cisco TelePresence Codec C40, C60, C90
•  Cisco TelePresence SX20 Quick Set
•  Cisco TelePresence SX80

The rating label is on the rear side of the unit:

• Cisco TelePresence System EX60, EX90
• Cisco TelePresence SX10 Quick Set

The rating label is on the rear side, behind the back cover:

• Cisco TelePresence MX200, MX300
• Cisco TelePresence MX200 G2, MX300 G2

The rating label is on the rear side of the panel; remove the left

side cover to find it:

• Cisco TelePresence MX700, MX800

If you have a Cisco TelePresence Profile Series, please use

one of the other methods to find the MAC address, as the

codec is mounted inside the column of the unit.

Contents

Introduction

CUCM configuration

Endpoint configuration

About passwords

Appendices