Руководство Пользователя для Brother QL-720NW
Transferring templates to the printer via the network (QL-580N /
1060N / 720NW only)
1060N / 720NW only)
25
Transferring templates to the printer via the network
(QL-580N / 1060N / 720NW only)
(QL-580N / 1060N / 720NW only)
To transfer the templates to the printer via the network, you need to use BRAdmin Professional. BRAdmin
Professional can be downloaded from our website at http://solutions.brother.com.
The printer names and pictures in the following screens may differ from your purchased printer. The screens
may vary depending on the model.
Professional can be downloaded from our website at http://solutions.brother.com.
The printer names and pictures in the following screens may differ from your purchased printer. The screens
may vary depending on the model.
1
Create the template you want to transfer with P-touch Editor 5.0, then choose [File]-
[Transfer Template...] menu to register.
[Transfer Template...] menu to register.
2
Click
to save the registered template in .blf format.
3
Start BRAdmin Professional.
Choose the printer and [Load Firmware] from the [Control]
menu.
menu.
4
Choose Load Firmware function of the BRAdmin
Professional.
Professional.
Choose [TFTP PUT] and click the [OK] button.
5
Choose the file in .blf format which you saved in step 2
and load it to the printer.
and load it to the printer.
Choose the .blf file and click the [OK] button.
If multiple printers are connected, you can find the
desired printer from its IP address.
The IP address can be checked by printing the printer
set-up information.
Press and hold down the Cut button when the power is
on to print the printer set-up information.
desired printer from its IP address.
The IP address can be checked by printing the printer
set-up information.
Press and hold down the Cut button when the power is
on to print the printer set-up information.
The default password is "access".