Руководство По Работе для Brother CS7130
KNOWING YOUR SEWING MACHINE
8
■
Storing the spool cap
The included spool cap (large, medium, small)
can be stored by attaching it to the spool pin as
illustrated below.
can be stored by attaching it to the spool pin as
illustrated below.
■
Storing the spool pin
When placing the cover on the sewing machine
or if the spool pin will not be used, return the
spool pin to its storage position.
or if the spool pin will not be used, return the
spool pin to its storage position.
Press until it clicks.
■
Installing the spool pin
1
Insert the tab on the spool pin into the hole.
1
Hole
2
Tab
2
Push the spool pin down until it locks into
place.
place.
USING YOUR SEWING
MACHINE
Power supply precautions
Be sure to observe the following precautions
concerning the power supply.
concerning the power supply.
WARNING
• Use only regular household electricity for the
power source. Using other power sources may
result in fire, electric shock, or damage to the
machine.
• Make sure that the plugs on the power cord
are firmly inserted into the electrical outlet
and the power supply jack on the machine.
Otherwise, a fire or electric shock may result.
• Do not insert the plug on the power cord into
an electrical outlet that is in poor condition.
• Turn off the main power and remove the plug
in the following circumstances:
· When you are away from the machine
· After using the machine
· When the power fails during use
· When the machine does not operate
correctly due to a bad connection or a
disconnection
· During electrical storms
CAUTION
• Use only the power cord included with this
machine.
• Do not use extension cords or multi-plug
adapters with many other appliances plugged
in to them. Fire or electric shock may result.
• Do not touch the plug with wet hands. Electric
shock may result.
• When unplugging the machine, always turn off
the main power first. Always grasp the plug
to remove it from the outlet. Pulling on the
cord may damage the cord, or lead to fire or
electric shock.
• Do not allow the power cord to be cut,
damaged, modified, forcefully bent, pulled,
twisted, or bundled.
Do not place heavy objects on the cord. Do
not subject the cord to heat. These things may
damage the cord and cause fire or electric
shock. If the cord or plug is damaged, take the
machine to your authorized dealer for repairs
before continuing use.
• Unplug the power cord if the machine is not to
be used for a long period of time. Otherwise a
fire may result.