Руководство По Работе для Brother CS7130

The operation buttons differ depending on the 
sewing machine model.

        

1 

Reverse/reinforcement stitch button 
Press this button to sew reverse stitches. Reverse 
stitches are sewn by keeping the button pressed down 
to sew in the opposite direction. For details, refer to 
“Sewing reinforcement stitches” (page 26).

■

2 

Start/stop button 
Press this button to start or stop sewing. The machine 
sews at a slow speed at the beginning of sewing while 
the button is depressed. When sewing is stopped, the 
needle is lowered in the fabric. For details, refer to 
“Starting to sew” (page 25).

3 

Needle position button 
Press this button to raise or lower the needle. 

4 

Sewing speed controller
Slide this controller to adjust the sewing speed.

The operation panel allows you to select a stitch and 
specify how the stitch will be sewn. The operation 
panel differs depending on the sewing machine 
model.
For models equipped with type A LCD

1 

The number of the selected stitch (1), the presser 
foot type to be used (2), the stitch length (mm) 
(3), and the stitch width (mm) (4) are displayed 
here.
The display location of the presser foot type (2) 
differs depending on the model.
This manual uses the illustrations of type A LCD.

2 

Select the number for the stitch that you wish to 
use.

3 

Press the “–” side to reduce the stitch length; 
press the “+” side to increase the stitch length.

4 

Press the “–” side to reduce the stitch width; press 
the “+” side to increase the stitch width.

■

5

7

8

6

5 

Press this key to select desired stitch category.

6 

Lights up when the utility stitch is selected with 
the stitch category selection key.

7 

Lights up when the mirror image stitch is selected 
with the stitch category selection key.

8 

Lights up when the character stitch is selected 
with the stitch category selection key.

Press down on the spool pin lever to raise the spool 
pin.