Руководство По Работе для Brother CS7130

Make sure that the needle passes through the hook-
and-loop fastener by turning the handwheel and 
lower the needle into the hook-and-loop fastener 
before sewing. And then, sew the edge of the hook-
and-loop fastener at a slow speed.
If the needle does not pass through the hook-and-
loop fastener, replace the needle with the needle for 
thick fabrics (page 19).

1 

Edge of the hook-and-loop fastener

When sewing thin fabrics, the stitching may become 
misaligned or the fabric may not feed correctly. If 
this occurs, place thin paper or stabilizer material 
under the fabric and sew it together with the fabric. 
When you have finished sewing, tear off any excess
paper.

1 

Stabilizer material or paper

First, baste the pieces of fabric together, and then 
sew without stretching the fabric.

1 

Basting

Removing the flat bed attachment makes it easier to 
sew cylindrical pieces such as cuffs and pant legs, or 
hard-to-reach areas.

1 

Flat bed attachment

1 

Flat bed attachment

 

X

With the flat bed attachment removed, free-
arm sewing is possible.

• When sewing cylindrical pieces, follow the 

next step.

• When you are finished with free-arm 

sewing, install the flat bed attachment back 

in its original position.