Руководство Пользователя для Brother ADS-3600W
Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)
9
3
Confirm Your Network Environment
3
Connected to a Computer with a WLAN Access Point/Router in the Network
(Infrastructure Mode)
(Infrastructure Mode)
3
1 WLAN access point/router
1
If your computer supports Intel
®
My WiFi Technology (MWT), you can use your computer as a Wi-Fi Protected Setup™ (WPS) supported
access point.
2 Wireless network machine (your machine)
3 Wireless-capable computer connected to the WLAN access point/router
4 Wired computer (that is not wireless-capable) connected to the WLAN access point/router with
3 Wireless-capable computer connected to the WLAN access point/router
4 Wired computer (that is not wireless-capable) connected to the WLAN access point/router with
a network cable
5 Mobile Device connected to the WLAN access point/router
Configuration Method
3
The following are different methods for configuring your Brother machine in a wireless network environment.
Choose the method you prefer for your environment:
Choose the method you prefer for your environment:
Wireless configuration, temporarily (Recommended). See the Quick Setup Guide.
One push wireless configuration using WPS (Wi-Fi Protected Setup™). See page 18.
PIN Method wireless configuration using WPS. See page 19.
Configure for a wireless network using the Setup Wizard. See page 29.
How to Check the WLAN Status (ADS-2800W / ADS-3600W)
3
1
On your machine’s LCD, press
.
2
Press Network.
3
Press WLAN.
4
Press a or b and then press WLAN Status.
5
Press Status.
2
5
1
4
3