Руководство По Работе для Brother Innov-is 6000D

13

When connecting patterns by using the camera, set the 
camera needle position. This operation is essential 
when you use this function for the first time. It is not 
necessary to perform this operation each time, but we 
recommend performing it when the needle is changed. 
Use the white stickers (solid) included with this Kit.

a

b

c

→ Camera needle position setting screen appears.

d

1. Raise needle bar to its highest position.

2. Remove presser foot and replace needle 

with a new embroidery needle standard 
size 75/11 or 90/14.

3. Affix white sticker on needle dropping 

point area.

a

White sticker

• Be careful not to touch the LCD screen prior to Step 

 below.

• This function can be performed with or without 

embroidery unit attached to machine. If attached, 
message screens will appear regarding movement 
of embroidery unit.

• The “Needle Position” button cannot be used while 

setting the camera needle position. Turn the 
handwheel counterclockwise to move the needle 
bar.

• Use a new sticker. The camera needle position 

cannot be set correctly if there is a hole in sticker or 
if it is dirty. If you have no new stickers, contact your 
nearest Brother dealer.