Руководство По Работе для Brother Innov-is 6000D

Using the Embroidery Foot “W2” with LED Pointer

Included Embroidery foot with LED pointer indicates the needle position with a red LED point.
The LED pointer shows you the location of the needle penetration so that it is easier to adjust the embroidery
position.

Included Item

Attaching Embroidery Foot “W2”

Press the “Needle Position” button to raise
the needle.

Press

to lock all keys and buttons.

→ The entire screen becomes white, and all keys and

operation buttons are locked.

Raise the presser foot lever.

Push the black button on the presser foot
holder and remove the presser foot.

a Black button

b Presser foot holder
→ Remove the presser foot from the presser foot

holder.

Use the screwdriver included with your
machine to remove the screw of the presser
foot holder, then remove the presser foot
holder.

a Screwdriver

b Presser foot holder

c Presser foot holder screw
→ Remove the screw and presser foot holder.

Part name

Part code

Embroidery foot “W2” with LED

pointer

XF6319-001

CAUTION

• When attaching a presser foot, always press

on the screen. You may accidentally

press the “Start/Stop” button and possibly
cause injury.

• Be sure to use the embroidery foot “W2” or

“W” (included with your machine) when
doing embroidery. Using another presser foot
may cause the needle to strike the presser foot,
causing the needle to bend or break and
possibly cause injury.

Note

• Instead of simply loosening the screw, it

must be temporarily removed, while the
embroidery foot “W” included with your
machine can be installed simply by
loosening the screw.