Руководство По Работе для Brother Innov-is VQ2400
SEWING THE STITCHES
U
tility
S
S
titc
h
h
es
Sewing S-49
S
2
■ Appliqué Corners
Stop the machine with the needle in the right
position of the outside (or inside) corner of the
appliqué. Raise the presser foot and pivot the fabric
to align the fabric edge. Lower the presser foot and
continue stitching.
position of the outside (or inside) corner of the
appliqué. Raise the presser foot and pivot the fabric
to align the fabric edge. Lower the presser foot and
continue stitching.
a Outside corner
b Inside corner
b Inside corner
Shelltuck Stitches
Shelltuck stitches give an attractive appearance of
shells along the curve of a collar. This stitch
pattern can be used for edging the neckline or
sleeves of dresses and blouses.
shells along the curve of a collar. This stitch
pattern can be used for edging the neckline or
sleeves of dresses and blouses.
a
Select .
b
Increase the upper thread tension for an
attractive scallop finish to the shelltuck
stitches (see page S-12).
attractive scallop finish to the shelltuck
stitches (see page S-12).
c
To make rows of shell tuck stitches, fold the
fabric in half along the bias.
fabric in half along the bias.
d
Attach presser foot “J”. Set the needle drop
point slightly off the edge of the fabric, and
start sewing.
point slightly off the edge of the fabric, and
start sewing.
a Needle drop position
Memo
• Placing a lightweight tear away stabilizer
beneath the stitching area will improve the
stitch placement along the edge of the
appliqué fabric.
stitch placement along the edge of the
appliqué fabric.
Memo
• For details on each stitch, refer to the
“STITCH SETTING CHART” on page S-67.
Memo
• If the upper thread tension is too weak, the
shelltuck stitches will not scallop.
Memo
• Use a thin fabric.