Руководство По Работе для Brother Innov-is VQ2400
SEWING THE STITCHES
U
tility
S
S
titc
h
h
es
Sewing S-51
S
2
c
Select a stitch for top stitching.
d
Place the fabric right side up in the
machine, and center the presser foot over
the seam when sewing.
machine, and center the presser foot over
the seam when sewing.
a Right side of fabric
Smocking Stitches
Use smocking stitches for decorative sewing on
clothes, etc.
clothes, etc.
a
Select a straight stitch and attach presser
foot “J”.
foot “J”.
b
Set the stitch length to 4.0 mm (approx.
3/16 inch) and loosen the upper thread
tension to approximately 2.0 (see “Setting
the Stitch Length” on page S-10 and
“Setting the Thread Tension” on page S-12).
3/16 inch) and loosen the upper thread
tension to approximately 2.0 (see “Setting
the Stitch Length” on page S-10 and
“Setting the Thread Tension” on page S-12).
c
Pull the bobbin and upper threads out by
50 mm (approx. 2 inches).
50 mm (approx. 2 inches).
d
Sew the seams, leaving approximately
10 mm (approx. 3/8 inch) between the
seams, then trim excess thread, leaving
50 mm (approx. 2 inches).
10 mm (approx. 3/8 inch) between the
seams, then trim excess thread, leaving
50 mm (approx. 2 inches).
a Approximately 10 mm (approx. 3/8 inch)
e
Pull the bobbin threads to obtain the
desired amount of gather, and then smooth
the gathers by ironing them.
desired amount of gather, and then smooth
the gathers by ironing them.
f
Select
or .
g
Sew the spaces between the straight seams.
h
Pull out the straight stitch threads.
Memo
• For details on each stitch, refer to the
“STITCH SETTING CHART” on page S-67.