Руководство По Работе для Brother Innov-is VQ2400

SEWING THE STITCHES

S-52

Fagoting

When there is a space between two fabrics with
thread sewn over the space to join the fabrics
together, it is called fagoting. Use this stitch when
sewing blouses or children’s clothes.

Baste two pieces of fabric onto thin paper,
leaving a space of 4 mm (approx. 3/16 inch)
between the fabrics.

If you draw a line down the middle of the thin paper
or water-soluble stabilizer, sewing is easier.

a 4.0 mm (approx. 3/16 inch)

b Paper
c Basting stitches

Select

or .

Attach presser foot “J”. Align the center of

the presser foot with the middle of the
space between the fabrics and begin
sewing.

a Basting stitches

When sewing is finished, gently tear the
paper away.

Tape or Elastic Attaching

Select a straight stitch and attach presser
foot “J”.

Set the stitch length to 4.0 mm (approx.
3/16 inch), and loosen the upper thread
tension to 2.0 (see “Setting the Stitch
Length” on page S-10 and “Setting the
Thread Tension” on page S-12).

Sew two rows of straight stitches on the
right side of the fabric, then pull the bobbin
thread to create the necessary gather.

Place the tape over the gather, and hold it
in place with basting pins.

a Tape

Memo

• For details on each stitch, refer to the

“STITCH SETTING CHART” on page S-67.

Memo

• Use a thick thread.

Memo

• Be sure that neither automatic

reinforcement

nor automatic thread

cutting

selected.

Memo

• Before sewing the straight stitch, rotate the

handwheel toward you (counterclockwise)
and pull up the bobbin thread. Holding the
top and bobbin thread, pull a length of
thread out from the rear of the machine. (Be
sure that the presser foot is raised.)