Инструкция С Настройками для Brother Innov-is VQ3000

3

g

*

The setting can also be applied by long touching an 
adjustment area with the sensor pen.

→ When a sewing end point setting is specified, 

 

appears in the upper-left corner of the screen.

→ The machine automatically stops with the needle in 

the fabric, at about half the distance to the specified 
sewing end point, and the sewing end point setting 
screen appears.

h

→ The distance from the current needle position to the 

touched location appears.

i

*

The setting can also be applied by long touching an 
adjustment area with the sensor pen.

j

*

The machine stops at the specified end point 
automatically.

The end of stitching is not adjusted. 
When the end point is reached, sewing 
stops immediately, even if the stitch 
pattern is not complete.

The length of the stitch pattern is 
adjusted so that sewing will stop at the 
specified end point with a complete 
pattern.

Note

• The stitch end mode key is not available 

with the following situations.

- When only 

 is shown. The 

adjustment of the stitch end is not 
available with the selected stitch, and only 
one icon will be shown.

- When the stitch end mode key is grayed 

out.

- When specifying the sewing end point at 

the point that needs adjustment more 
than 20% of the length of a pattern, to 
finish a pattern completely.

• In order to end sewing with a complete 

pattern, we recommend reducing the size of 
the pattern. Sewing with a long pattern may 
not end with a complete pattern.

Note

• By using the sensor pen to touch the 

sewing end point twice, the distance will be 
accurately specified. Be sure to touch the 
same point.

• The following error message appears if the 

location touched the second time is 
different than the location touched the first 
time. Touch the correct location.

• The stitch end mode key cannot be used 

when specifying the sewing end point for 
the second time.