Руководство По Работе для Brother Innov-is NQ3500D
Upper Threading
B-28
g
Reattach the bobbin cover.
Insert the tab in the lower-left corner of the bobbin
cover, and then lightly press down on the right side.
cover, and then lightly press down on the right side.
Using the twin needle
With the twin needle, you can sew two parallel lines of the
same stitch with two different threads. Both upper threads
should have the same thickness and quality. Be sure to use the
twin needle, the horizontal spool pin and the appropriate
spool caps.
same stitch with two different threads. Both upper threads
should have the same thickness and quality. Be sure to use the
twin needle, the horizontal spool pin and the appropriate
spool caps.
For details on the stitches that can be sewn with the twin
needle, refer to “Stitch Setting Chart” beginning on page B-47.
needle, refer to “Stitch Setting Chart” beginning on page B-47.
a
Install the twin needle.
• For details on installing a needle, refer to “Replacing
the needle” on page B-31.
b
Thread the upper thread for the left needle eye.
• For details, refer to steps
a
through
k
of
“Threading the upper thread” on page B-24.
c
Manually thread the left needle with the upper thread.
Pass the thread through the eye of the needle from the
front.
front.
d
Insert the horizontal spool pin onto the bobbin winder
shaft.
shaft.
Insert the spool pin so that it is perpendicular to the
bobbin winder shaft.
bobbin winder shaft.
1 Bobbin winder shaft
e
Swing the spool pin toward the left so that it is
horizontal.
horizontal.
f
Place the upper thread spool for the needle on the right
side onto the spool pin, and then secure it with the
spool cap.
side onto the spool pin, and then secure it with the
spool cap.
The thread should unroll from the top front of the spool.
1 Spool cap
2 Spool
2 Spool
Memo
• Traditionally a twin needle is also used for creating
pin tucks. Contact your nearest authorized
Brother dealer to obtain the optional pin tuck foot
for your machine (SA194, F069: XF5832-001).
Brother dealer to obtain the optional pin tuck foot
for your machine (SA194, F069: XF5832-001).
CAUTION
• Only use the twin needle (2.0/11 needle, part
code: X59296-121). Use of any other needle
may bend the needle or damage the machine.
may bend the needle or damage the machine.
• Never use bent needles. Bent needles can
easily break, possibly resulting in injuries.
• The needle threader cannot be used with the
twin needle. If the needle threader is used with
the twin needle, the machine may be
damaged.
the twin needle, the machine may be
damaged.
1
2
1
1
2