Руководство По Работе для Brother Innov-is NQ3500D
Upper Threading
GE
T
T
T
IN
G RE
A
D
Y
Basic operations B-29
B
g
Thread the upper thread in the same way that the
upper thread for the left side was threaded.
upper thread for the left side was threaded.
1 Thread guide cover
• For details, refer to steps
g
through
i
of
“Threading the upper thread” on page B-24.
h
Without passing the thread through the needle bar
thread guide, manually thread the right needle.
thread guide, manually thread the right needle.
Insert the thread through the eye of the needle from the
front.
front.
• The needle threader cannot be used with the twin
needle. If the needle threader is used with the twin
needle, the machine may be damaged.
needle, the machine may be damaged.
i
Attach zigzag foot “J”.
• For details on changing the presser foot, refer to
“Replacing the presser foot” on page B-33.
j
Turn on the machine and select a stitch.
• For stitch selection see “Sewing a stitch” on page B-
35.
• See “Stitch Setting Chart” on page B-47 for stitches
that use a twin needle.
k
Press
to display the settings screen.
l
Set “Twin Needle” to “ON.”
m
Press .
n
Start sewing.
• For details on starting to sew, refer to “STARTING TO
SEW” on page B-35.
→ Two lines of stitching are sewn parallel to each other.
CAUTION
• When using the twin needle, be sure to attach
zigzag foot “J”. If bunched stitches occur, use
presser foot “N” or attach stabilizer material.
presser foot “N” or attach stabilizer material.
CAUTION
• When using the twin needle, be sure to select
an appropriate stitch, otherwise the needle
may break or the machine may be damaged.
may break or the machine may be damaged.
1
CAUTION
• When using the twin needle, be sure to select
the twin needle setting, otherwise the needle
may break or the machine may be damaged.
may break or the machine may be damaged.
Note
• When changing the sewing direction, press
(Needle position button) to raise the needle from
the fabric, and then raise the presser foot lever
and turn the fabric.
the fabric, and then raise the presser foot lever
and turn the fabric.
CAUTION
• Do not try turning the fabric while the twin
needle is down in the fabric, otherwise the
needle may break or the machine may be
damaged.
needle may break or the machine may be
damaged.