Руководство По Работе для Brother Innov-is XV8500D
SEWING THE STITCHES
U
tili
ty
ty
S
tit
ch
es
147
3
e
Match beginning needle drop points on the
opposite edge of the open area to keep the
stitching symmetrical.
opposite edge of the open area to keep the
stitching symmetrical.
■ Hemstitching (3) (Drawn Work (2))
a
Pull out several threads from both sides of
the 4 mm (approx. 3/16 inch) area which
are not yet open.
the 4 mm (approx. 3/16 inch) area which
are not yet open.
*
Pull out four threads, leave five threads, and then
pull out four threads. The width of five threads is
approximately 4 mm (approx. 3/16 inch) or less.
pull out four threads. The width of five threads is
approximately 4 mm (approx. 3/16 inch) or less.
a Approx. 4 mm (approx. 3/16 inch) or less
b Four threads (pull out)
c Five threads (leave)
c Five threads (leave)
b
Select .
c
Sew the decorative stitch in the center of
the five threads created above.
the five threads created above.
Zigzag Couching
You can easily sew decorative stitching using yarn,
etc.
etc.
■ Prepare for the Zigzag Couching
a
Attach the spool stand to the machine.
*
Refer to “Using the Spool Stand” on page 58.
Memo
• For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of
this manual.
this manual.
Memo
• A wing needle can be used for Hemstitching
(3).
CAUTION
• When using yarn, we recommend selecting
yarn of weight 4 (MEDIUM
). If the yarn is
extremely thin or thick, has an unusual shape
(flat or furry), or more than 2 yarns, the best
finishing results may not be achieved, or
injuries or damage may result.
(flat or furry), or more than 2 yarns, the best
finishing results may not be achieved, or
injuries or damage may result.
Note
• Sew test stitches on the fabric before
sewing on your project.
• We recommend using a stabilizer material
when sewing stretch fabrics, lightweight
fabrics, fabrics with a coarse weave, or
fabrics which cause fabric shrinkage.
fabrics, fabrics with a coarse weave, or
fabrics which cause fabric shrinkage.