Руководство По Работе для Brother Innov-is XV8500D
CHANGING THE NEEDLE
G
etting
Re
ad
ad
y
75
1
a
Press the “Needle Position” button to raise
the needle.
the needle.
b
Press
to lock all keys and buttons.
*
If the message “OK to automatically lower the
presser foot?” appears on the LCD screen, press
presser foot?” appears on the LCD screen, press
to continue.
c
Use the screwdriver to turn the needle
clamp screw toward the front of the
machine and loosen the screw. Remove the
needle.
clamp screw toward the front of the
machine and loosen the screw. Remove the
needle.
CHANGING THE NEEDLE
CAUTION
• Always press
on the screen to lock all keys and buttons before changing the needle. If
is not
pressed and the “Start/Stop” button or another operation button is pressed accidentally, the machine will
start and injury may result.
start and injury may result.
• Use only sewing machine needles made for home use. Other needles may bend or break and may cause
injury.
• Never sew with a bent needle. A bent needle will easily break and may cause injury.
Memo
• To check the needle correctly, place the flat
side of the needle on a flat surface. Check
the needle from the top and the sides.
Throw away any bent needles.
the needle from the top and the sides.
Throw away any bent needles.
a Parallel space
b Level surface (bobbin cover, glass, etc.)
b Level surface (bobbin cover, glass, etc.)
Note
• Before replacing the needle, cover the hole
in the needle plate with fabric or paper to
prevent the needle from falling into the
machine.
prevent the needle from falling into the
machine.
Note
• Do not apply pressure to the needle clamp
screw. Doing so may damage the needle or
machine.
machine.