Руководство По Работе для Brother Innov-is XV8500D
CHANGING THE PRESSER FOOT
G
etting
Re
ad
ad
y
73
1
d
Hold the dual feed foot in place with your
right hand, then using the included
screwdriver securely tighten the large
screw.
screwdriver securely tighten the large
screw.
e
Plug the connector of the dual feed foot
into the jack on the back of your machine.
f
Press
to unlock all keys and buttons.
→ All keys and operation buttons are unlocked, and
the previous screen is displayed.
■ Attaching/Detaching toe
Attach the toe by aligning the pins with the notches
and snap it into place.
and snap it into place.
a Pins
b Notches
b Notches
If you push down on the front and back part of the
dual feed foot, the toe of the dual feed foot will snap
off.
dual feed foot, the toe of the dual feed foot will snap
off.
CAUTION
• Use the included screwdriver to firmly tighten
the screw. If the screw is loose, the needle may
strike the presser foot and possibly cause
injury.
strike the presser foot and possibly cause
injury.