Руководство По Работе для Brother Innov-is XV8550D
SEWING THE STITCHES
U
tili
ty
ty
S
tit
ch
es
153
3
Four-step Buttonholes
You can sew 4-step buttonholes using the
following 4 stitches together. You can sew any
desired length for the buttonhole when using 4-
step buttonholes. 4-step buttonholes are a good
option when attaching oversize buttons.
following 4 stitches together. You can sew any
desired length for the buttonhole when using 4-
step buttonholes. 4-step buttonholes are a good
option when attaching oversize buttons.
Four-step buttonholes are sewn as shown below.
a
Mark the position and length of the
buttonhole on the fabric.
buttonhole on the fabric.
a Marks on fabric
b Buttonhole sewing
b Buttonhole sewing
b
Attach monogramming foot “N”, and select
stitch
to sew the left side of the
buttonhole.
c
Press the “Start/Stop” button to start
sewing.
sewing.
d
Sew the desired length for the buttonhole
and press the “Start/Stop” button again.
and press the “Start/Stop” button again.
e
Select stitch
to sew the bar tack and
press the “Start/Stop” button.
→ The machine will automatically stop after sewing
the bar tack.
f
Select stitch
to sew the right side of the
buttonhole, and press the “Start/Stop”
button to begin sewing.
button to begin sewing.
g
Sew the right side of the buttonhole and
press the “Start/Stop” button again.
press the “Start/Stop” button again.
*
Sew the right side of the buttonhole the same length
as the left.
as the left.
h
Select stitch
to sew the bar tack and
then press the “Start/Stop” button.
→ The machine will automatically sew off the bar tack
tie and stop when the bar tack is complete.
i
Raise the presser foot and remove the
fabric.
fabric.
j
Refer to page 151 to open the buttonhole.
Note
• When changing the stitch settings, make
sure that all stitch settings are changed to
match.
match.
Stitch
Stitch name
Presser foot
4 steps buttonhole 1
4 steps buttonhole 2
4 steps buttonhole 3
4 steps buttonhole 4