Руководство По Работе для Brother PQ1500SL

18

Raise presser foot, and raise 

1

needle to highest position.
Loosen and remove screw using 

2

screwdriver.

Attach zipper foot and tighten 

3

screw.

Use the same method to attach 

 

✽

the other feet that come with 
your machine.
See page 23 for directions on 

 

✽

attaching the “Walking Foot”.

Use the position knob on back of 

 

✽

the zipper foot to adjust position 
of foot in relation to needle.
Only the zipper foot has a 

 

✽

position knob. You can begin 
sewing with all other presser feet 
immediately after attaching.

Use only feet supplied with your machine. Each foot is 

 

✽

specially designed for this machine and has clearance for 
the pin at the rear of each foot. Use of other presser feet 
may damage or break the pin feed mechanism.

CAUTION

Make sure the power to the machine is off before changing presser feet.

●

 

For sewing or 
quilting on fabrics 
which stick or tend 
to slip. Useful for 
sewing multiple 
layers as in quilting.

●

 

For quilt and 
patchwork piecing 
with 1/4” or 1/8” 
seam allowance.

●

 

Use to attach fasteners 
other than concealed 
fasteners. The zipper 
foot can also be used 
to secure piping in 
place as you sew. Use 
the side of the foot 
closest to the needle to 
rest against the edge of 
the piping as you sew.

●

 

This foot is used for 
most sewing. (Can 
also be used for 
sewing thick fabrics or 
seams.)
When sewing thick 

 

✽

seams, lightly guide 
the fabric with your 
hand on the downward 
side of the seam.
Can also be used with 

 

✽

pin feeding.

●

 

For perfect 
stitching on 
otherwise difficult 
fabrics like velvet, 
leather and suede.

●

 

Use on the edge 
of fabric, such as 
on hems of dress 
shirts, to fold the 
edge of the fabric 
in three while 
sewing.

●

 

Use to attach 
concealed fasteners.

●

Quilting Foot 
Spring action 
foot for darning, 
quilting or free 
motion embroidery.