Руководство По Работе для Brother PQ1500SL

20

Attach rolled hem foot.

1

Refer to page 18 for instructions 

 

✽

on changing sewing feet.

Position the fabric (reverse side 

2

facing up) under the presser 
foot. Insert needle approximately 
0.5 cm (3/16 inch) from the edge 
of the fabric and sew 2 stitches.

0.5 cm

0.5 cm

Thread end

Rolled Hem

Thread

With your right hand, put the 

5

edge of the rolled hem under 
the presser foot, from the spot 
where the threads come out. 
Insert the edge so that it lies 
directly under the needle. Lower 
the presser foot.

Pull gently on threads in left 

6

hand while sewing the first 3-4 
stitches to hold them in place.
Fold hem over about 0.5 cm 

7

(3/16 inch) and continue feeding 
folded hem under foot while 
sewing towards the curved 
guide on the foot.

Turn the handwheel towards you 

3

to raise the needle, raise the 
presser foot, then pull the fabric 
forward.
Be sure not to unthread the 

 

✽

fabric while pulling it forward.

Hold the 4 threads in your left 

4

hand.

CAUTION

Make sure the power to the machine is off before changing presser feet.