Руководство По Работе для Brother NX 600
UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
116
e
When you are finished sewing, use scissors to
trim off any excess threads at the beginning of
the stitching and between the patterns.
trim off any excess threads at the beginning of
the stitching and between the patterns.
Combining patterns
Multiple patterns can be combined and sewn
together.
together.
a
Select the first pattern, and then press
(OK key).
X
The first pattern is selected and appears in
the LCD.
the LCD.
• When the sewing is started, the selected
pattern is sewn repeatedly until the sewing
machine is stopped.
machine is stopped.
b
Press the + key in the operation panel.
X
The screen for selecting a pattern appears
again.
again.
c
Select the next pattern, and then press
(OK key).
To select a different stitch type, press
To select a different stitch type, press
(Stitch
selection key).
X
The combined patterns appear in the LCD.
• To remove a selected pattern, press the C key
in the operation panel. The pattern that was
selected last is removed.
selected last is removed.
d
Repeat steps
b
and
c
.
e
After all of the desired patterns are selected,
start sewing.
start sewing.
a Sewing direction
1
F3dash-BrotherE_sgml.book Page 116 Friday, September 5, 2003 5:46 PM