Руководство По Работе для Brother NX 600
Sewing the Various Built-In Decorative Patterns 117
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
X
The order that the patterns appear in the
LCD is the order that they will be sewn.
LCD is the order that they will be sewn.
Memo
z Up to 70 patterns can be combined.
z Some utility stitches cannot be combined.
z If multiple patterns have been combined, the
z Some utility stitches cannot be combined.
z If multiple patterns have been combined, the
sewing machine stops once all the selected
patterns displayed in the LCD have been
sewn. To repeatedly sew the combined
pattern, refer to "Repeat sewing patterns".
patterns displayed in the LCD have been
sewn. To repeatedly sew the combined
pattern, refer to "Repeat sewing patterns".
z The combined pattern can be stored for later
use. For details, refer to "Storing a pattern"
(page 123).
(page 123).
Repeat sewing patterns
To repeatedly sew the combined pattern, follow the
procedure described below.
procedure described below.
a
Select the pattern.
• For details, refer to "Combining patterns" (on
the previous page).
b
Press
(Settings key) in the operation panel.
X
The settings screen appears.
c
Press
,
,
and (Arrow keys) until
is selected.
d
Press
(OK
key).
X
The screen for specifying repeat sewing
appears.
appears.
e
Press to select
(repeat sewing).
To return to (single sewing), press
.
f
Press
(OK
key).
X
The initial stitch screen appears again, and
the machine is set to repeatedly sew the
selected pattern.
the machine is set to repeatedly sew the
selected pattern.
F3dash-BrotherE_sgml.book Page 117 Friday, September 5, 2003 5:46 PM