Руководство По Работе для Brother NX 600
SEWING BASICS
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
56
Adjusting the stitch length
The stitch length can be adjusted with the arrow keys.
a
Turn on the sewing machine.
X
The LCD comes on.
b
Select a stitch.
X
A screen containing settings for the selected
stitch appears.
stitch appears.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 66).
• Immediately after the stitch is selected, the
standard settings (highlighted) appear.
c
To make the stitch length shorter, press
(–).
To make the stitch length longer, press
(+).
X
The stitch length is changed.
• If the setting is changed, the highlighted
value is erased.
Memo
z To reset the stitch length to its standard
setting, select the same stitch again or
change the setting to the highlighted value.
change the setting to the highlighted value.
z The settings can be saved so that they will
always be specified each time the utility
stitch is selected. For details, refer to "Saving
stitch settings" (page 60).
stitch is selected. For details, refer to "Saving
stitch settings" (page 60).
CAUTION
–
+
● If the stitches are bunched together,
increase the stitch length. Continuing to
sew with the stitches bunched together
may result in the needle bending or
breaking.
sew with the stitches bunched together
may result in the needle bending or
breaking.
F3dash-BrotherE_sgml.book Page 56 Friday, September 5, 2003 5:46 PM