Руководство По Работе для Brother NX 600
SEWING BASICS
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
54
Changing the tension of the
upper thread
upper thread
The tension of the upper thread can be changed using
the operation panel LCD and keys.
the operation panel LCD and keys.
a
Turn on the sewing machine.
X
The LCD comes on.
b
Select a stitch.
X
A screen containing settings for the selected
stitch appears.
stitch appears.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 66).
• Immediately after the stitch is selected, the
standard settings (highlighted) appear.
c
Press
(Settings key) in the operation panel.
X
The settings screen appears.
d
Check that
is selected, and then press
(OK key).
X
The screen for changing the thread tension
appears.
appears.
e
To decrease the thread tension, press
(-). To
increase the thread tension, press (+).
X
The tension of the upper thread is changed.
• If the setting is changed, the highlighting on
the setting is erased.
• Now you can begin sewing. Sew trial stitches
to check the thread tension, and then change
the setting if necessary.
the setting if necessary.
f
Press
(OK
key).
X
The initial stitch screen appears again.
Memo
z To reset the thread tension to its standard
setting, select the highlighted setting.
z The thread tension can be adjusted using a
more simple procedure. For details, refer to
"Easily adjusting the thread tension" (page
147).
"Easily adjusting the thread tension" (page
147).
z The settings can be saved so that they will
always be specified each time the utility
stitch is selected. For details, refer to "Saving
stitch settings" (page 60).
stitch is selected. For details, refer to "Saving
stitch settings" (page 60).
F3dash-BrotherE_sgml.book Page 54 Friday, September 5, 2003 5:46 PM