Руководство По Работе для Brother NX-2000
SEWING THE STITCHES
80
f
Remove the basting, and then turn over the
fabric.
fabric.
a
Wrong side of fabric
b
Surface of fabric
■ If the Needle Does Not Catch the Fold
Press
in the width display so that the needle
slightly catches the fold.
■ If the Needle Catches Too Much of the Fold
Press
in the width display so that the needle
slightly catches the fold.
Appliqués
a
Use a temporary spray adhesive or basting to
attach the appliqué to the fabric.
attach the appliqué to the fabric.
a
Appliqué
b
Fabric glue
b
Press
or .
c
Attach the open toe foot, and then sew along
the edge of the appliqué, making sure that the
needle drops slightly off the edge.
the edge of the appliqué, making sure that the
needle drops slightly off the edge.
a
Appliqué
a
Needle drop point
Memo
Blind hem stitches cannot be sewn if the needle does
not catch the fold on the left side. However, if the
needle catches too much of the fold, the fabric cannot
be unfolded and too much of the seam will appear on
the surface of the fabric, leaving an unattractive finish.
If either of these occur, follow the instructions below to
correct the problem.
not catch the fold on the left side. However, if the
needle catches too much of the fold, the fabric cannot
be unfolded and too much of the seam will appear on
the surface of the fabric, leaving an unattractive finish.
If either of these occur, follow the instructions below to
correct the problem.
a
b
Memo
• Adjust the stitch width and length according to the
shape, size and fabric quality of the appliqué (see
page 42).
page 42).
• For details on the stitches, refer to the “STITCH
SETTING CHART” at the end of this manual.
b
a
a
a